DRYING EQUIPMENT | CURING TUNNELS - CURING OVENS - Electric, GAS & DO oil heating
The drying/curing stage determines the final quality of the coating. Uneven temperature or insufficient curing time leads to poor adhesion, colour deviation and inadequate hardness and gloss. Drying equipment must therefore be designed to match the coating technology and the capacity of the line.
+ DRYING EQUIPMENT WE SUPPLY:
1. DRY-OFF OVEN after pretreatment: dries the product surface after degreasing and phosphating, before the spray booth.
2. CONTINUOUS CURING TUNNEL: for automatic coating lines, with products moving continuously on an overhead conveyor.
3. BATCH CURING OVEN: for manual or semi-automatic coating systems, with products loaded on overhead rails or trolleys.
4. CURING OVENS for LARGE, HEAVY products: designed to the actual dimensions of the products.
+ HEATING SOURCES:
- GAS (LPG): gas burners with indirect heating via a heat exchanger, or infrared gas burners. Low operating cost, suitable for high-capacity lines.
- DO (diesel) OIL: DO oil burners with indirect heating via a heat exchanger, suitable where gas is not available.
- ELECTRIC HEATERS: direct, clean heating with easy temperature control, suitable for small and medium ovens.
+ TECHNICAL FEATURES:
- Powder coating curing temperature: 180°C ~ 220°C, curing time 10 ~ 15 minutes.
- Oven walls made of Rockwool mineral-wool insulated panels, reducing heat loss and saving energy.
- Hot-air recirculation fans ensure uniform temperature throughout the oven.
- Automatic control panel: temperature setting with automatic set-point holding, timer and over-temperature alarm.
----------------------------------------------------------------------------------------
PLANNING TO INVEST IN: A CURING TUNNEL OR PAINT CURING OVEN?
Contact us now for CONSULTATION and help SELECTING the most suitable equipment.
Hotline: 0913203999 - 0913537888 - 0889999802
